![background image](http://html.mh-extra.com/html/nilfisk-advance/908-4704-010/908-4704-010_instructions-for-use-manual_1692983017.webp)
146 3083 000(2)2008-11 A
FLOORTEC 350
15
USER MANUAL
ENGLISH
DUST FILTER CLEANING AND INTEGRITY
CHECK, HOPPER GASKET CHECK
1.
'ULYHWKHPDFKLQHRQDOHYHOÀRRU
2.
Turn the main switch (1) to “0”.
3.
Remove the hopper (9).
4.
Loosen the knobs (A, Fig. 8).
5.
*UDVSWKHGXVW¿OWHU%DVVKRZQLQWKH¿JXUH
6.
5HPRYHWKHGXVW¿OWHUE\WXUQLQJLWLQWKHGLUHFWLRQVKRZQ
by the arrow (A, Fig. 9) to disengage it from the pins (B),
WKHQORZHUWKH¿OWHUWRGLVHQJDJHLWIURPWKH¿OWHUVKDNHU
combs (C).
7.
5HPRYHWKH¿OWHU$)LJIURPWKHIUDPH%E\
disengaging the 2 rubber bands (C).
8.
,QDQDSSURSULDWHRXWGRRUDUHDFOHDQWKH¿OWHUE\VKDNLQJLW
on a level and clean surface, tapping the side (D) opposite
to the gasket (E).
Complete the cleaning procedure by using compressed air
(F) at maximum 6 Bar, blowing only from the side of the
gasket (E), at a minimum distance of 30 cm.
&KHFNWKH¿OWHUERG\IRUWHDUV,IQHFHVVDU\UHSODFHLW
)RUDEHWWHUFOHDQLQJLWLVDOORZHGWRZDVKWKH¿OWHUZLWK
water and non-lathering detergents. This provides better
TXDOLW\FOHDQLQJEXWUHGXFHVWKHOLIHRIWKH¿OWHUZKLFK
will have to be replaced more frequently. The use of
LQDGHTXDWHGHWHUJHQWVFDQGDPDJHWKH¿OWHU
9.
&OHDQWKHEHDULQJVXUIDFHRIWKH¿OWHUUXEEHUJDVNHW
(E) and check it for integrity and sealing capabilities. If
QHFHVVDU\UHSODFHWKH¿OWHU
10. Clean the bearing surface of the hopper gasket (D, Fig.
9) and check it for integrity and sealing capabilities. If
necessary, replace it.
11. Assemble the components in the reverse order of
disassembly.
NOTE
$VVHPEOHWKH¿OWHUZLWKWKHJDVNHW()LJ
SRVLWLRQHGDVVKRZQLQWKH¿JXUH
A
B
A
S311357
Figure 8
B
B
D
A
C
S311358
Figure 9
E
D
F
A
B
C
C
S311359
Figure 10