background image

FORM NO. 56091105 - BU800 - 

3

EN

ENGLISH

 WARNING!

To reduce risk of 

fi

 re, electric shock, injury or property damage, read all instructions before using.

*  This machine is not intended for use by persons (including children) with reduced physical, sensory or mental capa-

bilities, or lack of experience and knowledge.

*  While on ramps or inclines, avoid sudden stops.  Avoid abrupt sharp turns.  Use low speed down ramps.

*  Do not operate this machine until it is completely assembled.  Inspect the machine carefully before operation.

*  Machines can cause an explosion when operated near 

fl

 ammable materials and vapors.  Do not use this machine 

with or near fuels, grain dust, solvents, thinners, or other 

fl

 ammable materials.   

*  Lead acid batteries generate gases which can cause an explosion.  Keep sparks and 

fl

 ames away from batteries.  

Do not smoke around the machine.  Charge the batteries only in an area with good ventilation.  Make sure that you 

unplug the AC charger from the wall outlet before disconnecting from the machine.

*  Waste Disposal Method: Dispose as hazardous waste.  Observe all federal, state and local environmental regula-

tions for acid or lead scrap.  Send batteries to lead smelter for reclamation following applicable federal, state and 

local regulations. 

*  Working with batteries can be dangerous!  Always wear eye protection and protective clothing when working near 

batteries.  Remove all jewelry.  Do not put tools or other metal objects across the battery terminals, or the tops of the 

batteries.

*  Using a charger with a damaged power cord could result in an electrocution.  Do not use the charger if the power 

cord is damaged. 

*  Operating this machine from anywhere other than the back of the machine could result in injury or damage.  

*  This machine is heavy.  Get assistance before attempting to transport or move it. Use two able persons to move the 

machine on a ramp or incline.  Always move slowly.  Do not turn the machine on a ramp.  If operating machine on a 

gradient over 2%, do not stop, turn, or park.

*

  Machines can topple over if guided over the edges of stairs or loading docks and cause injury or damage.  Stop and 

leave this machine only on a level surface.  When you stop the machine, turn the key “OFF”. 

*

  Alterations or modi

fi

 cations not authorized by the manufacturer voids any and all warranties and liabilities and could 

result in damage to the machine or injury to the operator or other bystanders.

*  Maintenance and repairs performed by unauthorized personnel could result in damage or injury.  

*  Keep the electrical components of the machine dry.  Wipe the machine down after each use.  This machine shall 

be stored indoors only.  This machine is for indoor use only.

*  This machine is for dry use only.

*  Read all machine labels before attempting to operate.  Make sure all of the labels and instructional information are 

attached or fastened to the machine.

*

Use only commercially available 

fl

 oor cleaners and waxes intended for machine operation.  Do not use 

fl

 ammable 

materials.

*  The machine has to be disconnected from its power source during cleaning, servicing or maintaining the machine, 

replacing parts or converting to another function, by safely disconnecting a battery cable from one of the positive 

battery terminals.

*  Use of this machine to move other objects or to climb on could result in injury or damage.  Do not use this ma-

chine as a step or furniture.  Do not ride on this machine.

*

Your machine warranty will be voided if anything other than Nil

fi

 sk parts are used on your machine.

*  Observe the Gross Vehicle Weight, GVW, of the machine when loading, driving, lifting or supporting the machine.  

*  Children should be supervised to ensure that they do not play with the appliance.

*  Do not use on surfaces having a gradient exceeding that marked on the machine.

*  Use extreme CAUTION when operating this burnisher.  Be certain that you are thoroughly familiar with all of the 

operating instructions prior to using this burnisher.  If you have any questions, contact your supervisor or your local 

Nil

fi

 sk Dealer.

SAVE THESE INSTRUCTIONS

Summary of Contents for 56383526











Reviews: