Nilfisk-Advance 107146895, Service Manual, Page: 80 / 101

SM_MH 3M_4M Ver.1.2_May 2016
Service / Repair
80
F
Heating system.
Remove cabinet. Dismount the front bumper, by re-
moving the 4 screws (See red arrows in picture
above)
Remove bumper by pulling the bumper up (see red
arrows), and then pull bumper against you.
Remove screw for support pipe
Remove the right wheel, fuel tank lid, pump outlet
pipe, and the side cabinet part.
Remove the 3 screws holding the side cabinet part.
To remove the side cabinet part, pull it out from the
machine, and then up
Fuel tank dismount
Loosen the water break tank from its bracket by push-
ing the tap as shown above, and then pull up the tank
as far as possible