28
WIRING FOR NEW CONSTRUCTION
For best results, avoid running speaker wire near AC wiring, as it may induce a 60Hz hum in the
audio signal. It’s a good idea to run the speaker wire after the electrical wiring has already been
completed, so that you can route the speaker wire at least three feet away from the electrical
wiring. If speaker wire and AC wiring must run parallel, install the wire within a metal conduit.
NOTE: THE SW10WM IS DESIGNED FOR INTERIOR INSTALLATIONS BETWEEN STANDARD STUD
CONSTRUCTION. INSTALLATION IN OUTDOOR LOCATIONS OR IN MOISTURE-PRONE INTERIOR
ENVIRONMENTS SUCH AS INDOOR SWIMMING POOLS OR SAUNAS IS NOT RECOMMENDED.
SPECIFICATIONS
Frequency Response:
SW10JM: 38Hz - 140Hz +/-3dB
SW10WM: 45Hz - 140Hz +/-3dB
Amplifier Power:
SW10JM: For use with SWA-500M only
SW10WM: For use with SWA-500M only
Overall Dimensions (with grille)
SW10JM Joist Mount Subwoofer: 30" W x 9" H x 13.81" D
76.2 cm W x 22.9 cm H x 35.1 cm D
SW10WM Wall Mount Subwoofer: 13.780" W x 46.298" H x 3.248" D
35 cm W x 117.6 cm H x 8.25 cm D
Weight
SW10JM Joist Mount Subwoofer: 57.3 lbs (25.8 kg) shipping weight
SW10WM Wall Mount Subwoofer: 47.8 lbs (21.7 kg) shipping weight
