3. Set the SVL-6 volume controls which correspond to the
speaker pairs you wish to play to maximum.
4. Locate the appropriate ON/OFF buttons on the SVL-6. Set
them to the ON position.
5. Turn on the amplifier or receiver and select as source, such
as the tuner or CD player.
6. Slowly turn up the amplifier or receiver volume and set it to
a comfortable (not maximum) listening level. Be careful not to
overdrive or "clip" your amplifier. If the sound becomes
muddy or distorted, you have reached the limit of your ampli-
fier's volume capability and should quickly reduce the volume
to avoid damaging your speakers.
7. Using the appropriate volume controls on the front of the
SVL-6, adjust the volume of the speakers to the desired listen-
ing level.
8. You can turn off the speakers by turning the corresponding
volume controls on the SVL-6 fully counter-clockwise, or by
pressing the appropriate ON/OFF button. Refer to the
Protection chart for the correct setting of the PROTECTION
button.
S
P E A K E R
S
E L E C T I O N
/ V
O L U M E
C
O N T R O L
S
Y S T E M
1
3
