9
S
P E A K E R
- L
E V E L
V
O L U M E
C
O N T R O L
The inputs of the SVL-1 are the connector terminals labeled
"AMPLIFIER". The outputs are the connector
terminals labeled "SPEAKERS". Be sure not to reverse these
connections or the SVL-1 will not function properly.
4. Locate the pre-printed Room Labels. Affix the appropriate
label to the recessed area next to the knob on the SVL-1.
Operation
1. Make sure the amplifier or receiver power is OFF and set
the volume to minimum.
2. Set the SVL-1 volume to maximum (fully clockwise).
3. If you are using a Niles speaker selection system, locate the
ON/OFF button which corresponds to the speaker pair you
wish to play. Set it to the ON position.
4. Turn on the amplifier or receiver and select a source, such
as the tuner or CD player.
5. Slowly turn up the amplifier or receiver volume and set it
to a comfortable (not maximum) listening level. Be careful
not to overdrive or "clip" your amplifier. If the sound
becomes muddy or distorted, you have reached the limit of
your amplifier's volume capability and should quickly reduce
the volume to avoid damaging your speakers.
