nilco 2638003, Operating Instructions Manual

Page: 36 / 48

12
Handle [ l ]
9. Insert the handle [ l ] of the suction hose into the larger
end of the suction tube [ m ], turning slightly.
Suction tube [ m ]
10. Insert the smaller end of the suction tube into the larger
end of the other suction tube, turning slightly.
11. Insert the smaller end of the lower suction tube into the
connection socket [n] of the floor nozzle, turning slightly.
Your vacuum cleaner is now ready for use.
Instead of the floor nozzle, you can also attach the
crevice nozzle or upholstery nozzle onto the handle of
the suction hose or onto the suction tube by turning it
slightly.
The floor suction nozzle (D) has a switch (1) which sets the
nozzle for cleaning of either carpets or hard flooring. You
can activate this switch with your food.
Vacuum cleaning hard floors:
The brush element is extended.
The slider (2) should be on standard setting hard floor/carpet
(right stop). For hard floors with cracks, tiles, etc, the slider
(2) must be set on the symbol „crevice“ (left stop).
Carpeting:
The brush element is retractet . Set slider on standard hard
floor
Floor nozzle [ D ]
The floor nozzle can be set for vacuuming carpets (bristle
collar retracted) or for hard floors (bristle collar extended)
with the switch [o].
Crevice nozzle [ E ]
The crevice nozzle can be used to vacuum dirt out of deep
crevices in upholstered furniture, corners, trim, etc.
Upholstery nozzle [ F ]
The upholstery nozzle can be used to vacuum curtains, up-
holstered furniture, etc. It has a thread catcher for removing
lint and threads from the textiles.
Accessories
m
l
m m
D
E F
1
2
D
Ill. similar
en