4
Introduction
General information prior to installation
The following documents will be supplied with the unit:
• Installation and service instructions
• Software instructions
• Wiring diagram
• Test report
The instructions can be downloaded from www. nilan.dk/da-dk/forside/download.
If you have questions regarding installation and operation of the unit after having read the instructions, please contact your nearest
Nilan
dealer. A list of Nilan dealers is available on www.nilan.dk/forhandlere.
The purpose of these instructions is to advise the installer on correct installation and maintenance of the unit.
The unit is delivered from the factory, tested and ready for operation.
Disclaimer
In order to achieve correct operation of the unit and to ensure the safety of persons and equipment, the instructions must be followed.
Nilan A/S disclaims all responsibility for damages resulting from usage of the unit and/or accessories conflicting with the directions
and instructions of this manual.
Symbols explained
Application of instruction manual
This instruction manual applies to Nilan’s ventilation and heat recovery unit, hereafter referred to as unit. Information on accessories
that are included and other additional equipment can be found in the Accessories section.
ATTENTION
In order to avoid discoloration of the metal sheets, remove the protective foil packaging from the unit immediately after
delivery. Discoloration is caused by a chemical reaction triggered by condensation between the foil and the galvanized
sheets. Then, if necessary, cover the unit with tarpaulin to protect it.
WARNING
Violation of instructions marked with a warning symbol could be hazardous to life.
ATTENTION
Violation of instructions marked ATTENTION could pose risk of personal injury or damage to equipment.