Ret til ændringer forbeholdes
Side 20 af 30
Restart
The ”Restart” menu enables you to set the unit to automatically restart in connection with high-
pressure/low-pressure alarms.
Fire alarms can be acknowledged automatically in connection with fire drills/testing. A condition for
acknowledgement is that the fire thermostat input has returned to normal state.
” ”
indicates that the menu point flashes and can be set to another value
The setting HP/LP in the Restart menu may not be used under normal conditions.
Use of the CTS602 panel:
- press ESC
to go one step back in the menu
- press
qp
to move up or down in a menu or to adjust an
activated menu
- press ENTER
to activate a menu
- press ENTER
to confirm a menu
- press OFF
to turn off the unit
- press ON
to turn the unit on
.
HOTWATER
This setting must
never
be
used during normal
operation. Indicates that
the system is to be
restarted automatically in
connection with high or
low pressure alarms.
AIR
EXCHANGE
DEFROST
INLET
CONTROL
SERVICE
ENTER
TEMP.
CONTROL
MANUAL
OFF
PRESET
OFF
ROOM
CONTROL
RESTART
OFF
ENTER
RESTART
”HP/LP”
RESTART
”OFF”
Indicates that the system
will
not
be restarted
automatically in
connection with high or
low pressure alarms.
MODBUS
ADR
30
CENTRAL
HEATING
AIR
QUALITY
DATALOG
INTV 10
RESTART
”FIRE”
FIRE:Even Receipt
when fire input is back
to normal
Figure 14: The "Restart" menu
