Ret til ændringer forbeholdes
Side 18 af 30
Inlet control
In the ”Inlet control” menu it is possible to adjust the period of time before restart of the compres-
sor.
” ”
indicates that the menu point flashes and can be set to another value
The ”Inlet control” menu should only be adjusted by persons with knowledge of control
engineering. (To restore factory settings see PRESET)
Use of the CTS602 panel:
- press ESC
to go one step back in the menu
- press
qp
to move up or down in a menu or to adjust an
activated menu
- press ENTER
to activate a menu
- press ENTER
to confirm a menu
- press OFF
to turn off the unit
- press ON
to turn the unit on
TEMP.
CONTROL
HOTWATER
AIR
EXCHANGE
DEFROST
SERVICE
ENTER
RESTART
OFF
MANUAL
OFF
PRESET
OFF
ROOM
CONTROL
INLET
CONTROL
HEATPUMP
RST ”6m”
ENTER
ENTER
The minimum length of
time (in minutes) the
compressor must be
stopped before
restarting.
MODBUS
ADR
30
CENTRAL
HEATING
AIR
QUALITY
DATALOG
INTV 10
Figure 12: The "Inlet control" menu
