Subject to alterations
Page 6 of 34
Installing Compact Polar Køl Sol EK 3/9
When installing the unit, it is important to take future service and maintenance into ac-
count. There should be a minimum clearance of 602mm in front of the unit, measured
from the Compact Polar Køl Sol EK 3/9 front panel.
When lifting the unit with straps it is important that the straps has an angle of maximum
45°C off perpendicular.
Individual connectors have been marked out at the factory to facilitate installation. Please note the
attached labels. The connectors should be connected to the duct system using flexible adapters
(flex tube, soundproofed flex tube or similar).
Figur 2: Duct Connections
1. Ø160
Afkastluft
Fortluft
Discharge air
Air extrait
2. Ø160
Fraluft
Abluft
Exhaust air
Air repris
3. Ø160
Tilluft
Zuluft
Inlet air
Air pulsè
4. Ø160
Udeluft
Aussenluft
Fresh air
Air frais
