We
reserve the right to make changes
Page 39 of 40
Electircal supply and controls
Control
Yes/No
Memo
Date
The mains supply, protection and connection, must be
according to the wiring diagram and manual.
Chosen form of regulation in the control, fixed or varia-
ble heating temperature
N/A
Fixed
Variabel
Selected setpoint Elected curve for central heating tem-
perature
N/A
°C
curve
The ourdoor sensor is mounted when weather compen-
sation is used (variable temperature of central heating).
Central temperature compliance requirements for max.
45 ° C
In case a remote running signal from the heat system is
used, connection must be made and heat pump control-
ler configured for this
Supplementing electrical heating element is activated if
required, after the system has been filled with water and
put into operation
The recommended seetings of the controls, described in
the manual, are checked. Any adjustments are noted for
later reference.
The mains supply, protection and connection, must be
according to the wiring diagram and manual.
