Temp. regulation
The settings are used to control the bypass damper if an after-heating element has not been installed.
If you wish to control the supply air temperature, an after-heating element must be installed. An after-
heating element allows you to control the supply air temperature, regardless of the outdoor
temperature.
An external electrical or water after-heating element can be installed in the supply air duct.
ATTENTION
When heating is not needed in the dwelling, the supply air temperature may fall below the
minimum temperature.
Temp. regulation
↳
Min. supply air summer
Settings:
Standard setting:
Description:
5
↔
16 °C
14 °C
Here you can set the minimum supply air temperature
that the unit should provide in the summer. If the
outdoor temperature is lower than indicated, the
bypass damper will close and the unit will run on heat
recovery.
↳
Min. supply air winter
Settings:
Standard setting:
Description:
14
↔
22 °C
16 °C
Here you can set the minimum supply air temperature
that the unit should provide in the winter. Only
effective with an after-heating element.
↳
Max. supply air summer
Settings:
Standard setting:
Description:
16
↔
25 °C
22 °C
Here you can set the maximum supply air temperature
that the unit should provide when heating is required
(only displayed on the panel if the unit is fitted with an
after-heating element).
↳
Max. supply air winter
Settings:
Standard setting:
Description:
14
↔
22 °C
16 °C
Here you can set the maximum supply air temperature
that the unit should provide when heating is required
in the winter (only displayed on the panel if the unit is
fitted with an after-heating element).
↳
Summer change
Settings:
Standard setting:
Description:
5
↔
30 °C
12 °C
Here you can set the minimum outdoor temperature
for the unit to run in summer mode. If the outdoor air
temperature is lower, the unit will run in winter mode.
Comfort 252 / 302 Top / Polar (English)
BY NILAN
21
