background image

3. MODEL DESCRIPTION

LCD-1200GW is a dual band repeater model that amplify signals for GSM and 3G at 900 and 2100 MHz
frequencies, respectively. As a result, it is compatible with most of the network operators based in the EU.

The coverage area of the model is up to 1200 m² (13000 ft²), which is sufficient enough for villas, offices,
parking lots, restaurants, supermarkets, and conference halls, etc.

If you are tired of slow Youtube videos, social media and browsing, it is about time to upgrade to Nikrans
LCD-1200GW booster. While the supported 3G frequency is 2100 MHz, if your operator transmits 3G at 900
MHz, the booster will also be able to support it.

Nikrans LCD-1200GW is and efficient repeater with a number of characteristics:

LCD displays

. There are 2 LCD screens on this repeater providing vital information about GSM

and 3G signals, respectively. The repeater shows signal level, working status, setup tips, error
solutions, and more.

Auto adjustment

. LCD-1200GW adjusts incoming signals and gain levels automatically based on

incoming signal strength.

Energy saving option

. The repeater is energy efficient and turns off automatically when no

smartphone activity is performed within its coverage area.

100% safety in use

. With the internationally recognised CE and RoHS certifications, it is without

a doubt, one of the best and safest repeaters in the market.

Order Nikrans LCD-1200GW now and enjoy uninterrupted voice calls and 3G internet!

Summary of Contents for LCD-1200GW






















Reviews: