C
The photo shooting menu: Shooting options
318
- The value selected for [I
nterval] is longer than that selected for
[Shooting time]
- [00:00'00"] is selected for [Interval] or [Shooting time]
- [On] is selected for both [Silent photography] and [Interval priority]
and [00:00'0.5"] is selected for [Interval]
- The memory card is full
･
If time-lapse video recording cannot start at current settings, for example
because shutter speed is set to “Bulb” or “Time”, a warning will be
displayed.
･
The
K
button cannot be used to view pictures while time-lapse recording
is in progress.
･
For consistent coloration, choose a white balance setting other than
4
[Auto] or
D
[Natural light auto] when recording time-lapse videos.
･
Regardless of the option selected for Custom Setting c3 [Power off delay]
> [Standby timer], the standby timer will not expire while recording is in
progress.
･
Shooting may end if camera controls are used, settings are changed, or an
HDMI cable is connected. A video will be created from the frames shot to
the point where shooting ended.
･
The following end shooting without a beep sounding or a video being
recorded:
- Removing the battery
- Ejecting the memory card
D
During shooting
The memory card access lamp lights while shooting is in progress.
D
Settings between recordings
Shooting and menu settings can be adjusted between time-lapse video
recordings. Note, however, that the monitor will turn off and shooting will
resume in about 2 seconds before the next shot is taken.
D
Time-lapse videos: Restrictions
Time-lapse video recording cannot be combined with some camera features,
including:
