723
B
The Setup Menu: Camera Setup
Pixel mapping checks and optimizes the camera image sensor. If you
notice unexpected bright spots appearing in pictures taken with the
camera, perform pixel mapping as described below.
•
Pixel mapping is available only when a Z mount lens or an optional
FTZ II/FTZ mount adapter is attached.
•
To prevent unexpected loss of power, use a fully-charged battery, the
supplied charging AC adapter, or an optional AC adapter and power
connector.
•
To start pixel mapping, select [
Start
]. A message is displayed while the
operation is in progress.
D
Cautions: Pixel Mapping
•
Do not attempt to operate the camera while pixel mapping is in progress.
Do not turn the camera off or remove or disconnect the power source.
•
Pixel mapping may not be available if the camera’s internal temperature is
elevated.
Pixel Mapping
G
button
U
B
setup menu
