Nikon WT-6, User Manual

Page: 48 / 64

34
10
Enter the following information and click Next .
• Network name (SSID) : Enter the name of the network on which
the host computer or ftp server is located.
• Communication mode : Select Infrastructure or Access point .
• Channel : Select a channel (access point mode only; in
infrastructure mode, the WT-6 will choose the channel
automatically). Note that if a matching SSID is found on a
different channel, the WT-6 may change the channel
automatically.
• Authentication : The authentication used on the network.
Choose from open system, shared key, WPA-PSK, and WPA2-
PSK (infrastructure) or open system and WPA2-PSK (access
point mode).
• Encryption : The encryption used on the network. The options
available depend on the authentication used.
Open : 64- or 128-bit WEP (infrastructure mode only); none
Shared : 64- or 128-bit WEP
WPA-PSK
: TKIP; AES
WPA2-PSK : AES
• Encryption key : If the network uses encryption, enter the
network key. The number of characters required depends on
the type of key used:
WEP (64-bit) WEP (128-bit) TKIP, AES
Number of characters (ASCII) 5 13 8–63
Number of characters (hex) 10 26 64