26
AUTO POWER CUT OFF
OFF 10´ 30´
TILT TELESCOPE
■■■
HA: 0°00´00"
(6) Automatic Power Cut-Off Selection
•
OFF: Auto cut-off disabled for continuous uninterrupted operation.
•
10':
10-minute interval before auto cut-off.
•
30':
30-minute interval before auto cut-off.
Selecting “10' ” or “30' ” enables the automatic power cut-off
function. It automatically turns off the power when the instrument is
left
unattended*
for the designated period of time, “10' ” or “30' ”,
conserving battery life. The buzzer will sound 5 times a minute
before the power cuts off.
* The term “unattended” means
(I) No key operation, or
(II) No changes in either horizontal or vertical angles.
Do the same key operation as in step (3).
(7) Depression of the [HOLD] key in
step (6) will save all settings in the
internal memory.
The LCD will then revert to the initial start-up screen. You can
proceed to measurement operations. (Refer to p.27)
Note
•
To cancel the setting procedure mid-operation, turn OFF the
power switch before the final depression of the [HOLD] key
in step (6). In this case, any changes made to the setting will
be invalid.
•
It is not possible to return to the previous setting item. To go
to a previous setting item, turn OFF the power once and
restart from the first item.
•
Input of any other key than those specified for the initial
setting procedures will be ignored.
[HOLD] key
Summary of Contents for NE-100
Page 48: ...V CHECKING AND ADJUSTMENT ...