Nikon K Series, Instruction Manual

Page: 192 / 198

9 Error Messages
174 Nikon N Series/K Series Total Station Instruction Manual
Job Manager
Cannot Assign
90.12
You have tried to set the current job as the control file.
Press any key to return to the previous screen. Then select a different job.
Can't Create
90.13
There is no space available to create a job or record a point.
Press any key to return to the Job Manager. Then use the
DEL
softkey to delete old
jobs.
Existing Job
90.14
You have entered an existing job name for a new job.
Press any key and then change the name for the new job.
MAX 50Jobs
90.15
You are trying to create a new job when the maximum number of jobs (50) is already
stored.
Press any key to return to the Job Manager. Then use the
DEL
softkey to delete old
jobs.
Programs
NO Stn Setup
90.16
You did not perform a station setup or BS check before entering the Programs
function.
B
Tip – Selecting
Continue
does not resume the last ST record. You should only use the
Continue
option if you are sure that the previous ST coordinates and the current HA
orientation are correct. Otherwise, records in the Programs function may not be correct.
XY&Z coordinate are required
90.17
Three-dimensional coordinates are required in S-Plane function.
Press any key to return to the point input screen. Then enter a three-dimensional
point.
To ... Press ...
go to the Stn Setup menu
[2]
or select
Stn Setup
return to the BMS
[ESC]
go to the Programs menu
[1]
or select
Continue