Nikon FA Instruction Manual Download Page 75 | Manualshive

Page: 75 / 77

background image

76

SPECIFICATIONS

continued

M mode: Both aperture and
shutter speed set manually.

Exposure P mode:

Viewfinder LCD shows

information

discrete shutter speed closest to
automatically selected speed; LCD
also shows HI or Lo indication to warn
of over- or underexposure or FEE to
warn of aperture missetting.
S mode: LCD shows discrete
f-number closest to automatically
selected aperture or discrete shutter
speed closest to automatically selected
speed when manually set shutter
speed is improper; LCD also shows HI
or Lo to warn of over or under
exposure or FEE to warn of aperture
missetting; manually set shutter speed
always shown via shutter speed
indication.
A mode: LCD shows discrete shutter
speed closest to automatically selected
speed; LCD also shows HI or Lo to
warn of over- or underexposure;
manually set aperture always shown
via ADR window.
M mode: LCD shows manually set
shutter speed preceded by M; -+
indicates correct exposure with + or -
indicating over or underexposure;
manually set aperture always shown
via ADR window.

Exposure

±2 EV compensation (in one-

compensation

third increments) possible via dial; red
LED exposure compensation mark
visible in viewfinder when meter is on.

Film speed range

ASA/ISO 12 to 4000

Shutter

Electromagnetically controlled vertical
travel, metal focal plane shutter with
titanium curtains.

Shutter speeds

Stepless speed f rom 1 to 1/4000 sec.
in automatic exposure modes (except
S mode); ceramic-oscillator-controlled
discrete speeds from 1 to 1/4000 sec.
in S and M modes; mechanically
controlled, 1/250 sec. at M250 setting
and long exposure at B setting
available.

Film advance lever

Wound in single stroke with 30°
stand-off angle and 135° winding
angle; doubles as shutter release
button lock

Automatic film

Possible with optional Motor Drive

advance

MD-15 or MD-12

Frame counter

Additive type, self-resetting: for blank
exposures before frame 1, shutter fires
at 1/250 sec at any shutter speed dial
setting except B

Film rewind

Via folding crank and rewind button in
baseplate

Self timer

10 sec. delayed exposure

Eyepiece shutter

Prevents stray light from entering
viewfinder during unmanned operation

«
...
73
74
75
76
77
»

Summary of Contents for FA














































































Reviews:

No comments

Related manuals for FA

Brand: Conrad Pages: 8

Brand: Datavideo Pages: 136

Brand: Pulnix Pages: 44

UAV-GA-T-2030TA

Brand: Dahua Pages: 17

Brand: XTS Pages: 32

DH-HAC-HFW1200TL

Brand: Dahua Pages: 30

Brand: KALEAS Pages: 48

Brand: Videology Pages: 6

Brand: TRENDnet Pages: 110

Brand: Samcon Pages: 24

Brand: VistaQuest Pages: 10

Brand: BUFF Pages: 24

Brand: TBK vision Pages: 20

PerfectView CAM301

Brand: Dometic Pages: 180

Brand: Z3 Technology Pages: 58

Brand: Panasonic Pages: 311

Brand: Panasonic Pages: 41

Brand: Avidsen Pages: 160

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands