Nikon eclipse fn1, Instructions Manual

Page: 9 / 59

Notes on Handling the Microscope System
7
Notes on Handling the Microscope System
1 Handle with care
This microscope system is a precision optical instrument. Handle the microscope system with care to avoid
shock on impact.
In particular, objectives may loose accuracy when exposed to even a weak physical shock.
2 Weak electromagnetic waves
The power supply for this microscope system emits weak electromagnetic waves. There is a possibility that
some precision electronic devices are affected by the electromagnetic waves. To prevent bad influences,
locate such electronic equipment away from the microscope system. If a TV or radio reception is affected,
move the TV or radio set farther from the product.
3 Dirt on the lens
Scratches or fouling such as fingerprints on optical components (lenses, filters, and so on) will degrade
microscope images.
If these parts become dirty, clean them as described in Capter 6, "Care and Maintenance" at the end of this
manual.
4 Dirt on the lamp
Never touch the lamp with bare hands. Dirt or fingerprints on the lamp will result in uneven illumination and
reduce the service life of the lamp. Always wear gloves when handling lamps.
5 Installation location
This microscope system is a precision optical instrument. So, the usage or storage in an inappropriate
environment may result in malfunctions or poor performance. Consider the following factors when selecting
an installation location:
•
Fix the microscope FN1 body securely on a baseplate or a vibration isolator with bolts.
•
When the microscope is mounted on a microscope slider such as an XY mover, fix the microscope
body on the microscope slider securely with bolts or so on to prevent the microscope from toppling
over.
•
The halogen lamp light source, the lamp house, and the optical fiber light source need to dissipate heat
when the lamp is lit. So, locate such heat sources at least 10 cm away from walls.
•
Choose a location less exposed to hazards in the event of collisions, earthquakes, or other potential
disasters. Choose a sturdy vibration isolator, desk, or table for the base of the microscope system.
•
Avoid bright locations where the product is exposed to direct sunlight or immediately under room lights.
If the ambient light is bright, the microscopy image will be affected.
•
Choose a location that is free from considerable dust or dirt.
•
To avoid splashes, do not use the microscope system near water.
•
Make sure the ambient temperature is 0 to 40°C and humidity is 85% or less. Using or storing the
product in hot, humid locations may result in mold formation or condensation on lenses, performance
degradation, or malfunctions.
•
Select a layout that allows easy removal of the power cords from the AC inlets on the power supply
and the optical fiber light source in the event of an emergency.