Nikon D610, User Manual

Page: 263 / 368

237
U
❚❚
Commander Mode
Use the built-in flash as a master flash controlling one or more remote optional flash
units in up to two groups (A and B) using advanced wireless lighting (
0 294).
Selecting this option displays the menu shown at right. Press 4
or 2 to highlight the following options, 1 or 3 to change.
A
The SB-400 and SB-300
When an optional SB-400 or SB-300 flash unit is attached and turned on, Custom Setting e3
changes to
Optional flash , allowing the flash control mode for the optional flash unit to be
selected from TTL and Manual ( Repeating flash and Commander mode options are not
available).
A
“Times“
The options available for Repeating Flash > Times are determined by flash output.
Output Options available for “Times” Output Options available for “Times”
1/4 2 1/32 2–10, 15
1/8 2–5 1/64 2–10, 15, 20, 25
1/16 2–10 1/128 2–10, 15, 20, 25, 30, 35
Option Description
Built-in
flash
Choose a flash mode for the built-in flash (commander flash).
TTL
i-TTL mode. Choose flash compensation from values b3.0 and –3.0 EV in
increments of
1
/
3
EV.
M Choose the flash level from values between 1/1 and 1/128 (
1
/
128
of full power).
– –
The built-in flash does not fire, although remote flash units do. The built-in flash
must be raised so that it can emit monitor pre-flashes.
Group A Choose a flash mode for all flash units in group A.
TTL
i-TTL mode. Choose flash compensation from values b3.0 and –3.0 EV in
increments of
1
/
3
EV.
AA
Auto aperture (available only with compatible flash units;
0
294). Choose flash
compensation from values b3.0 and –3.0 EV in increments of
1
/
3
EV.
M Choose the flash level from values between 1/1 and 1/128 (
1
/
128
of full power).
– – The flash units in this group do not fire.
Group B
Choose a flash mode for all flash units in group B. The options available are the
same as those listed for
Group A , above.
Channel
Choose from channels 1–4. All flash units in both groups must be set to the same
channel.