Nikon D610, User Manual

Page: 179 / 368

153
t
Bracketing
Bracketing automatically varies exposure, flash level, A ctive D - L ighting (ADL), or
white balance slightly with each shot, “bracketing” the current value. Choose in
situations in which it is difficult to set exposure, flash level (i-TTL and, where
supported, auto aperture flash control modes only; see pages 146, 236, and 294),
white balance, or Active D-Lighting and there is not time to check results and adjust
settings with each shot, or to experiment with different settings for the same subject.
❚❚
Exposure and Flash Bracketing
To vary exposure and/or flash level over a series of photographs:
1
Select flash or exposure bracketing for
Custom Setting e
6 ( Auto bracketing
set ) in the Custom Settings menu.
To display the menus, press the
G
button.
Select Custom Setting e6 ( Auto bracketing
set ) in the Custom Settings menu, highlight
an option, and press
J
. Choose AE & flash
to vary both exposure and flash level, AE
only to vary only exposure, or Flash only to
vary only flash level.
2
Choose the number of shots.
Pressing the
D
button, rotate the main command dial to choose the number
of shots in the bracketing sequence and the order in which they will be taken.
D will be displayed in the viewfinder (see
right); the control panel will show M .
Number of shots
Bracketing progress
indicator
D
button Main command dial Control panel
No. of shots Bracketing progress indicator Bracketing order
Normal exposure, underexposure, overexposure
Normal exposure, overexposure
Normal exposure, underexposure
(P, S, A, and M Modes Only)
G button