Nikon D6, Reference Manual

Page: 408 / 1198

356
Creating a Movie from Photos (Time-Lapse Movie)
❚❚
Ending Shooting
To end shooting before all the photos are taken, press J or
select [ Time-lapse movie ] in the photo shooting menu,
highlight [ Off ], and press
J
. Note that the menus may not be
displayed when the
G
button is pressed if the time selected
for [ Interval ] is very short.
•
A movie will be created from the frames shot to the point
where shooting ended and normal photography will resume.
D Calculating the Length of the Final Movie
•
The total number of frames in the final movie can be calculated by
dividing the shooting time selected in Step 2 by the interval, rounding
up, and adding 1.
•
The length of the final movie can then be calculated by dividing the
number of shots by the frame rate selected for [
Frame size/frame rate ]
(for example, a 48-frame movie recorded with [ 1920 × 1080; 24p ]
selected for [ Frame size/frame rate ] will be about two seconds long).
•
The maximum length for time-lapse movies is 20 minutes.
1
Frame size/frame rate
2
Memory card indicator
3
Length recorded/maximum
length