127
S
3
Adjust settings.
The maximum value for auto ISO
sensitivity can be selected using
Maximum sensitivity
(the minimum
value for auto ISO sensitivity is
automatically set to ISO 100; note that if
the ISO sensitivity selected by the user is higher than that
chosen for
Maximum sensitivity
, the value selected by the
user will be used instead). In exposure modes
P
and
A
,
sensitivity will only be adjusted if underexposure would result
at the shutter speed selected for
Minimum shutter speed
(
1
/
4000
–30 s, or
Auto
; in modes
S
and
M
, ISO sensitivity will be
adjusted for optimal exposure at the shutter speed selected by
the user). If
Auto
is selected, the camera will choose the
minimum shutter speed based on the focal length of the lens.
Press
J
to exit when settings are complete.
To choose the maximum ISO sensitivity for photos taken using
an optional flash unit (
418), use
Maximum sensitivity with
M
. Selecting
Same as without flash
sets the maximum ISO
sensitivity for flash photography to the value currently
selected for
Maximum sensitivity
.
When
On
is selected, the viewfinder and
top control panel show
ISO-AUTO
. When
sensitivity is altered from the value selected
by the user, these indicators flash and the
altered value is shown in the viewfinder
and top control panel.