215
l
6
C
/
f
: Frame the photograph, focus, and shoot.
In radio AWL, the flash-ready indicator
will light in the camera viewfinder (
10)
or flash information display when all flash
units are ready. The status of radio-
controlled units can also be viewed by
selecting
Flash control
>
Radio remote
flash info
in the photo shooting menu.
A
Optical AWL
Position the sensor windows on the remote flash units to pick up the
light from the master flash (particular care is required if the camera is
not mounted on a tripod). Be sure that direct light or strong reflections
from the remote flash units do not enter the camera lens (in TTL mode)
or the photocells on the remote flash units (
q
A mode), as this may
interfere with exposure. To prevent low-intensity flashes emitted by the
master flash from appearing in photographs taken at short range,
choose low ISO sensitivities or small apertures (high f-numbers) or
rotate the flash head on the master flash to point upwards. After
positioning the remote flash units, take a test shot and view the results
in the camera monitor.
A
Flash Compensation
The flash compensation value selected with the
W
(
M
) button and sub-
command dial is added to the flash compensation values selected in the
wireless flash options menu.
Y
icons blink in the top control panel and
viewfinder when a flash compensation value other than ±0 is selected
for the master or remote flash units in TTL or
q
A mode.
