background image

86

Taking Photographs—Exposur

e

P: Programmed Auto

In this mode, the camera automatically adjusts shutter speed and aperture 
ac cord ing to a built-in program (see below) for optimal exposure in most 
sit u a tions.  This mode is recommended for snapshots and other sit u a tions in 
which you want to leave the camera in charge of shutter speed and aperture.  
Ad just ments can be made using fl exible  program,  ex po sure com pen sa tion 
(

  97), and auto ex po sure bracketing (

  98).  Programmed auto is only 

available with CPU lenses.

To take photographs in programmed auto:

1

 Press the 

 button and rotate the main com-

mand dial until 

is displayed in the viewfi nder 

and top control panel.

Subject too dark.  Use optional Speedlight or raise sensitivity (ISO equiv-
 a len cy; 

 48).

Description

Indicator

Subject too bright.  Use optional Neutral Density (ND) fi lter or lower sen-
sitivity (ISO equivalency; 

 48).

2

 Frame a photograph, focus, and shoot.

 Non- CPU Lenses

Exposure mode 

A

 (aperture-priority auto) is automatically selected when a non-CPU 

lens is attached.  The exposure mode indicator (

P

) in the top control panel will blink 

and 

will be displayed in the viewfi nder.  For more information, see “Aperture-Priority 

Auto” (

 90).

 Exposure Warning

If the limits of the exposure metering system are exceeded, one of the following in di -
ca tors will be dis played in the control panel and viewfi nder:

Summary of Contents for D2H









































































































































































































































































Reviews: