Nikon D2H User Manual Download Page 134

Page: 134 / 264

122

Taking Photographs—Interval Timer Photography

Shooting Mode

Regardless of the shooting mode selected, the camera will take the specifi ed number
of shots at each interval. In

(continuous high speed) mode, photographs will be

taken at a rate of eight shots per second. In

(single frame),

(continuous low-

speed), and

M-

(mirror up) modes, photographs will be taken at the rate chosen for

Custom Setting d1 (

Shooting speed

;

188). In

(self-timer) mode, the shutter-

release delay applies to each photograph taken.

M-

mode, the mirror will be raised automatically immediately before each shot. If

the shutter-release button is pressed between photographs, the mirror will be raised
and will remain raised until the next photograph is taken.

Shooting Menu Banks

Changes to interval timer settings apply to all shooting menu banks (

162). If shoot-

ing menu settings are reset using the

Reset shooting menu

item in the shooting

menu (

164), interval timer settings will be reset as follows:

• Start time:

Now

• Interval: 00:01´:00˝
• Number of intervals: 1
• Number of shots: 1
• Start:

Off

Interrupting Interval Timer Photography

To interrupt interval timer photography:

Press the multi selector left or right to highlight

Start

at the bottom of

the interval timer menu (see opposite).

Press the multi selector up or down to select

Done

and press the

but-

ton.

Interval timer photography will also be interrupted if:
• A two button reset is performed (

128).

• Another shooting bank is selected (

162).

•

Reset shooting menu

is selected in the shooting menu (

164).

• Bracketing settings are changed (

98).

•  The battery is exhausted.
•  The clock battery is exhausted.
•  The camera is connected to a computer.

Normal shooting will resume when interval timer photography ends.

Summary of Contents for D2H









































































































































































































































































Search results

Summary of Contents for D2H

Reviews:

Brands by name

Popular brands

Nikon D2H, User Manual

Search results

Summary of Contents for D2H

Reviews:

Brands by name

Popular brands