Nikon COOLPIX S7000, Reference Manual

Page: 163 / 180

Te
chni
cal Note
s
143
Bright specks
appear in images
captured with
flash.
The flash is reflecting off particles in the air. Set the
flash mode setting to
W
(off).
41
Flash does not
fire.
•
The flash mode is set to
W
(off).
•
A scene mode that restricts the flash is selected.
•
A function that restricts the flash is enabled.
41
50
56
Digital zoom
cannot be used.
•
Digital zoom is set to Off in the setup menu.
•
Digital zoom cannot be used with certain
shooting modes or when using certain settings in
other functions.
112
57, 112
Image mode not
available.
A function that restricts Image mode is enabled. 56
No sound when
the shutter is
released.
Off is selected for Shutter sound in Sound
settings in the setup menu. No sound is produced
with some shooting modes and settings, even
when
On is selected.
112
AF-assist
illuminator does
not light.
Off is selected for AF assist in the setup menu. AF-
assist illuminator may not light depending on the
position of the focus area or the current shooting
mode, even when
Auto is selected.
111
Images appear
smeared.
The lens is dirty. Clean the lens. 135
Colors are
unnatural.
White balance or hue is not adjusted properly. 26, 80
Randomly spaced
bright pixels
(“noise”) appear in
image.
The subject is dark and the shutter speed is too
slow, or ISO sensitivity is too high. Noise can be
reduced by:
•
Using the flash
•
Specifying a lower ISO sensitivity setting
41
84
Images are too
dark
(underexposed).
•
The flash mode is set to
W
(off).
•
The flash window is blocked.
•
The subject is beyond the range of the flash.
•
Adjust exposure compensation.
•
Increase ISO sensitivity.
•
The subject is backlit. Select Backlighting scene
mode or set the flash mode setting to
X
(fill flash).
41
12
150
47, 49
84
24, 41
Problem Cause/Solution
A