E
92
Re
fe
No access.
The camera could not receive the signal from the smart
device. Select
Connect to smart device
in the Wi-Fi
options menu, and establish the wireless connection
again.
81,
Could not connect.
The camera failed to establish the connection while
receiving the signals from the smart device. Set a
different channel in
Channel
under
Options
in the Wi-Fi
options menu, and establish the wireless connection
again.
81,
Wi-Fi connection
terminated.
A cable was connected to the camera while the camera
and smart device were wirelessly connected, the battery
level became low, or the connection was aborted due to
poor connectivity. Disconnect the cable and establish
the wireless connection again.
81,
Lens error
A lens error occurred.
Turn the camera off and then on again. If the error
persists, contact your retailer or Nikon-authorized service
representative.
Communications error
An error occurred while communicating with the printer.
Turn the camera off and reconnect the USB cable.
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the battery, and
turn the camera on. If the error persists, contact your
retailer or Nikon-authorized service representative.
Display
Cause/Solution
A
Summary of Contents for CoolPix S5300
