196
Error Messages
Refer to the table below if an error message is displayed.
Error Messages
Display
Cause/Solution
A
Battery temperature
is elevated. The
camera will turn off.
The camera turns off automatically. Wait until the
camera or battery temperature has cooled before
resuming use.
–
The camera will turn
off to prevent
overheating.
Memory card is write
protected.
The write-protect switch is in the “lock” position.
Slide the write-protect switch to the “write” position.
This card cannot be
used.
An error occurred while accessing the memory card.
•
Use an approved memory card.
•
Check that the terminals are clean.
•
Confirm that the memory card is correctly inserted.
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card.
If you need to keep copies of any images, make sure to
select
No
and save the copies to a computer or other
medium before formatting the memory card. Select
Yes
and press the
k
button to format the memory
card.
Out of memory.
Delete images or insert a new memory card.
Image cannot be
saved.
An error occurred while saving the image.
Insert a new memory card or format the memory card.
The camera has run out of file numbers.
Insert a new memory card or format the memory card.
Image cannot be
modified.
Check that the images can be edited.
Cannot record
movie.
A time-out error occurred while saving the movie on
the memory card.
Select a memory card with a faster write speed.
Cannot reset file
numbering.
File numbering cannot be reset because the sequential
number of a folder has reached the upper limit.
Insert a new memory card or format the memory card.
Downloaded from
