165
Error Messages
Memory contains no
images.
There are no images in the internal memory or on the
memory card.
•
Remove the memory card to play back images in
the internal memory.
•
To copy the images saved in the camera’s internal
memory to the memory card, press the
d
button
to select
Copy
in the playback menu.
File contains no
image data.
The file was not created or edited with this camera.
The file cannot be viewed on this camera.
View the file using a computer or the device used to
create or edit this file.
–
This file cannot be
played back.
All images are
hidden.
•
There are no images available for a slide show, etc.
–
•
There are no images that can be displayed on the
image selection screen for deletion.
This image cannot be
deleted.
The image is protected.
Disable protection.
Raise the flash.
•
When the scene mode is
Scene auto selector
, you
can take a picture even if the flash is lowered but the
flash will not fire.
•
When the scene mode is
Night portrait
or
Backlighting
with
HDR
set to
Off
, you must raise
the flash to take a picture.
No card present.
When shooting time-lapse movies or the shooting
mode is set to short movie show mode, insert a
memory card.
–
No access.
The camera could not receive the communication
signal from the smart device.
Wirelessly connect the camera and smart device again.
•
Touch an NFC-compatible smart device to the camera.
•
Select
Connect to smart device
in the Network menu.
Turn the camera off
and then on again.
If the error persists, contact your retailer or Nikon-
authorized service representative.
–
Communications
error
An error occurred while communicating with the printer.
Turn the camera off and reconnect the USB cable.
System error
An error occurred in the camera’s internal circuitry.
Turn the camera off, remove and reinsert the battery,
and turn the camera on. If the error persists, contact
your retailer or Nikonauthorized service representative.
Display
Cause/Solution
A