Nikon Coolpix 55200, Quick Start Manual

Page: 203 / 313

E
47
Referen
ce S
e
ct
io
n
B
Notes About Continuous Shooting
• When a setting other than Single is selected, flash cannot be used. Focus, exposure, and white
balance are fixed at the values determined with the first image in each series.
• It may take some time to save the images after shooting. The amount of time it takes to finish
saving the images depends on the number of images, image mode, the write speed of the
memory card, etc.
• When ISO sensitivity increases, noise may appear in captured images.
• The frame rate for continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
• When Continuous is set to Pre-shooting cache , Continuous H: 120 fps , Continuous H:
60 fps , or Multi-shot 16 , banding or variance in brightness or hue may occur in images that were
captured under lighting that flickers at high speeds, such as fluorescent, mercury-vapor, or
sodium-vapor lighting.
• Some settings cannot be used with other functions (
A
70).
B
Notes About BSS
BSS is suited for shooting stationary subjects. BSS may not produce the desired results if the subject
moves or the composition changes.
C
Images Captured in Continuous Shooting Mode
Each time images are captured using Continuous H , Continuous L , Pre-shooting cache ,
Continuous H: 120 fps , or Continuous H: 60 fps , the captured images are saved as a “sequence”
(
E
13).