Nikon autofocus speedlight SB-80DX User Manual Download Page 86

Page: 86 / 108

Wireless multiple flash shooting in A (auto) mode

Wireless multiple flash shooting

Set the camera’s exposure mode to Aperture-

Priority Auto (A) or Manual (M).

Set up all Speedlights as master and slave

flash units.

Set all SB-80DX units (used as the master and

slave flash units) to the Wireless flash mode.

Press the

button on the slave flash unit to

activate the A (auto) mode.

Set the flash mode of the master Speedlight to

the TTL auto flash mode.

With Nikon Digital SLRs cameras, wireless flash

cannot be set, if the flash mode is set to D-TTL auto
flash. In this case, set the flash mode to Auto
Aperture or Non-TTL auto flash.

Confirm the aperture and flash shooting distance
range as in normal TTL auto flash shooting, then
shoot.

See page 28 about the TTL auto flash mode.

See pages 42, 40 about the Auto Aperture or Non-

TTL auto flash mode with Digital SLRs cameras.

Flash operation can be confirmed by the ready-light

or the beeping sound (p. 89).

Summary of Contents for autofocus speedlight SB-80DX













































































































Search results

Summary of Contents for autofocus speedlight SB-80DX

Reviews:

Related manuals for autofocus speedlight SB-80DX

Brands by name

Popular brands

Nikon autofocus speedlight SB-80DX, User Manual

Search results

Summary of Contents for autofocus speedlight SB-80DX

Reviews:

Related manuals for autofocus speedlight SB-80DX

Brands by name

Popular brands