Nikon autofocus speedlight SB-80DX User Manual Download

Page: 20 / 108

Attach the SB-80DX to the camera and

Turn the mounting foot lock lever securely until it stops.

To lock the Speedlight in place, turn the lock lever approx. 90° clockwise until
it stops. To unlock, turn the lever counterclockwise until it stops.

Lock

Unlock

Make sure the SB-80DX and the camera

body are turned off.

Rotate the mounting foot lock lever to the
left, slide the SB-80DX’s mounting foot
into the camera’s accessory shoe and turn
the lock lever to the right.

Hold down the flash head tilting/rotating

lock release button to adjust the flash
head to the horizontal/front position.

Summary of Contents for autofocus speedlight SB-80DX













































































































Search results

Summary of Contents for autofocus speedlight SB-80DX

Reviews:

Related manuals for autofocus speedlight SB-80DX

Brands by name

Popular brands

Nikon autofocus speedlight SB-80DX, User Manual

Search results

Summary of Contents for autofocus speedlight SB-80DX

Reviews:

Related manuals for autofocus speedlight SB-80DX

Brands by name

Popular brands