JAA80251-R.3723.A
- Ａ 8・AF-S 24-70/2.8G -
SWM
Adhesive: Lockend B
・
Attach the three plate springs with two screws (#96) each at three places. [Select the plate spring (from A
or B type) by checking the followings:]
・
When
the MF ring is rotated slowly, check whether the focus index ring subsequently moves together
. (If
the focus index ring does not follow smoothly, change the spring to a thicker one.
）
・
When the MF ring is rotated all the way to ∞ (infinity)-end and close-end positions, check whether the
only MF ring runs idle. (If it does not run idle, change the spring to a thinner one.
）
#65×3
#96×6
Grease: NKS-211SP
Pattern surface
・
Adhere the focus index sheet with the adhesive double coated-tape and two pieces of tape (#196).
・
Position the focus index sheet as follows:
Focus index sheet
Equalize the gap (1mm)
at both sides.
3.5mm
Closeup
1mm
#196×2
Select from A or B
Positioning of Focus index sheet
INC
