Nikon 25466, User Manual

Page: 84 / 460

58
x
6
End live view.
Press the
a
button to end live view.
D
Focusing with Contrast-Detect Autofocus
Contrast-detect autofocus will take longer than normal (phase-
detection) autofocus. In the following situations, the camera may be
unable to focus using contrast-detect autofocus:
• The camera is not mounted on a tripod
• The subject contains lines parallel to the long edge of the frame
• The subject lacks contrast
• The subject in the focus point contains areas of sharply contrasting
brightness, or the subject is lit by spot lighting or by a neon sign or
other light source that changes in brightness
• Flicker or banding appears under fluorescent, mercury-vapor, sodium-
vapor, or similar lighting
• A cross (star) filter or other special filter is used
• The subject appears smaller than the focus point
• The subject is dominated by regular geometric patterns
(e.g., windows in a skyscraper)
• The subject is moving
Note that the focus point may sometimes be displayed in green when
the camera is unable to focus.
Use an AF-S lens. The desired results may not be achieved with other
lenses or teleconverters.
A
Remote Cords
If the shutter-release button on a remote cord (available separately; see
0
376) is pressed halfway for over a second in tripod mode, it will
activate contrast-detect autofocus. If the remote cord shutter-release
button is pressed all the way down without focusing, focus will not be
adjusted before the picture is taken.