Nikon 25466, User Manual

Page: 426 / 460

400
n
Photos not recorded in live view mode :
• Sound of mirror clicking down when shutter-release button was pressed
halfway in hand-held mode was mistaken for sound of shutter (
0
63).
• Unless Release is chosen for Custom Setting a2 ( AF-S priority
selection ), shutter release is disabled if camera is unable to focus when
focus mode S is selected in hand-held mode (
0
63, 296).
Flicker or banding appear during live view or movie recording : Choose an option for
Flicker reduction that matches the frequency of the local AC power
supply (
0
330).
Bright bands appear during live view or movie recording
: A flash or other light
source with brief duration was used during live view or movie recording.
Highlights are “washed out” in movies or the live view display
: Select Off for High-
sensitivity movie mode (
0
72).
Noise (randomly-spaced bright pixels, fog, or lines) appears in photos
:
• Choose lower ISO sensitivity or use high ISO noise reduction
(
0
110, 291).
• Shutter speed is slower than 1 s: use long exposure noise reduction
(
0
291).
• Reddish areas or other artifacts appear in long time-exposures: turn long
exposure noise reduction on when shooting at a shutter speed of
“
A
” (
0
291).
Photos are blotched or smeared
:
• Clean lens.
• Clean low-pass filter
(
0
378).
Colors are unnatural :
• Adjust white balance to match light source (
0
150).
• Adjust Set Picture Control settings (
0
170).
Can not measure white balance
: Subject is too dark or too bright ( 0 160).
Image can not be selected as source for preset white balance : Image was not created
with D3S ( 0 164).
White balance bracketing unavailable :
• NEF (RAW) or NEF+JPEG image quality option selected for image quality
(
0
83).
• Multiple exposure mode is in effect (
0
207).