Nikon 18-55MM - D300S DSLR Digital Camera User Manual Download Page 404

Page: 404 / 432

378

Error Messages

This section lists the indicators and error messages that appear in
the viewfinder, control panel, and monitor.

Indicator

Problem

Solution

Control

panel

View-

finder

(blinks)

Lens aperture ring is
not set to minimum
aperture.

Set ring to minimum
aperture (largest
f-number).

Low battery.

Ready a fully-charged
spare battery.

(blinks)

• Battery exhausted.

• Recharge or replace

battery.

xxiii, 22,

• Battery can not be

used.

• Contact Nikon-

authorized service
representative.

• An extremely

exhausted
rechargeable Li-ion
battery or a third-
party battery is
inserted either in the
camera or in the
optional MB-D10
battery pack.

• Replace the battery,

or recharge the
battery if the
rechargeable Li-ion
battery is exhausted.

(blinks)

—

Camera clock is not set. Set camera clock.

Summary of Contents for 18-55MM - D300S DSLR Digital Camera

















































































































































































































































































































































































































































Search results

Summary of Contents for 18-55MM - D300S DSLR Digital Camera

Reviews:

Nikon 18-55MM - D300S DSLR Digital Camera, User Manual, Page: 404 / 432

Search results

Summary of Contents for 18-55MM - D300S DSLR Digital Camera

Reviews: