manualshive.com logo in svg

Nikon 18-55MM - D300S DSLR Digital Camera, User Manual, Page: 373 / 432

Share
Download
Nikon 18-55MM - D300S DSLR Digital Camera User Manual Download Page 373

347

n

Optional Flash Units 

(Speedlights)

The camera supports the Nikon Creative Lighting System (CLS) and 
can be used with CLS-compatible flash units. Optional flash units 
can be attached directly to the camera accessory shoe as described 
below. The accessory shoe is equipped with a safety lock for flash 
units with a locking pin, such as the SB-900, SB-800, SB-600, and 
SB-400.

1

Remove the accessory shoe cover.

2

Mount the flash unit on the 
accessory shoe.

See the manual provided with the flash 
unit for details. The built-in flash will not 
fire when an optional flash unit is 
attached.

A

The Sync Terminal

A sync cable can be connected to the sync 
terminal as required. Do not connect another 
flash unit via a sync cable when performing rear-
curtain sync flash photography with a flash unit 
mounted on the camera accessory shoe.

Summary of Contents for 18-55MM - D300S DSLR Digital Camera

















































































































































































































































































































































































































































Reviews:

No comments