USER MANUAL
– Self-cleaning filter – JF1500/JF3000
NIKO - Fruit processing machinery
www.niko-si.si
14
6 STARTING AND STOPPING THE SELF-CLEANING FILTER
6.1 STARTING THE SELF-CLEANING FILTER
Procedure for turning on the self-cleaning filter:
-
Connect the self-cleaning filter to power supply (the white light signal will indicate that it is connected).
-
The self-cleaning filter is ready for use.
6.2 STOPPING THE SELF-CLEANING FILTER
-
Normal stop of the self-cleaning filter is done by turning both switches (filter and mode switch) to
»0«
position
located in the control panel.
-
The self-cleaning filter will stop working.
-
To disable it definitely, the filter must be disconnected from the power supply.
See chapter 7 for more information about the working modes.
Before starting the self-cleaning filter check all the conditions for a safe functioning:
-
check that there are no objects on the machine, which could block normal functioning,
-
make sure that there are no people standing by the self-cleaning filter and could be endangered
when turning the machine on,
-
check if the electrical cable and plugs are undamaged,
-
check if the tubes are correctly mounted.
Never plug in the self-cleaning filter with wet hands!
Summary of Contents for JF1500
Page 1: ......
