Electricity measuring module with three channels
• measuring range with current clamps supplied: 5 - 14 490 W, 22 mA - 63 A
• measuring range with current clamp 550-00809: 90 - 27 600 W, 400 mA – 120 A
• maximum measuring range of the entire measuring module: 32768 W
• input voltage: 230 Vac
• 3 current clamps (included)
• accuracy: IEC 62053-21 class 1 (R), class 2 (L)
• connection:
• three-phase: 3N 400 Vac, 50 Hz
• single-phase: three switching circuits of 230 Vac, 50 Hz
• cable thickness for the included current clamps: 1 x 10 mm² or 6 x 2.5 mm² or 9 x 1.5 mm²
• maximum cable thickness for the current clamp 550-00809: 4 x 10 mm² or 12 x 12.5 mm² or 20 x 1.5 mm²
• length of the connector cable at each current clamp: 100 cm
• not suited to measuring direct current components
• measuring data only for information purposes, not valid for invoicing
• 3 x 2 screw terminals to measure the voltage of the connected switching circuits
• 3 x 2 screw terminals to connect the current clamps supplied
• sliding contact to connect the module to the following module on the DIN rail
• dimensions: DIN 4E
• CE marked
• ambient temperature: 0 - 45°C
Current clamp 120 A
• expands the measuring range of the measuring modules up to 90 - 27600 W, 400 mA – 120 A per channel
• specify the type of current clamp during programming
• can be locked/unlocked up to ± 100 times
• length of the connector cable at the current clamp: 100 cm (may not be shortened or lengthened)
• maximum cable thickness for the current clamp: 4 x 10 mm² or 12 x 12.5 mm² or 20 x 1.5 mm²
• accuracy: IEC 62053-21 class 1 (R), class 2 (L)
• minimum insulation resistance: 100 MΩ (between core and output terminals)
• weight: 75 g
• ambient temperature: -20°C - 50°C
• dimensions: 55 x 29.5 x 31 mm (H x W x D)
• CE marked
48
Electricity measuring modules