17
10-805-01
3. OPERATION AND USE
If the installation has been carried out correctly and is connected to the mains, the LED
on POWER SUPPLY 20 or POWER SUPPLY 100 lights. The LED on the external unit lights,
thereby illuminating the vandalproof name plate. Pick up the receiver of the internal unit to
communicate with your visitor. In case of a system with video, the image of the visitor is also
displayed. The connection is wound up simply by putting the receiver down or automatically
after 60s. For details concerning the operation of the internal and/or external unit(s), consult
the corresponding user manuals.
LED indication on the DC power supply (10-805-01)
LED
meaning
description
green
normal operation
- The power supply operates normally.
red
overload
- The output current of 2.5A is exceeded.
- The load has to be reduced.
red
(blinking)
limit (max. load) ex-
ceeded and/or short
circuit
- Limit (max. load) exceeded and/or short circuit on
secundary circuit: the 10-805-01 interrupts the
secundary circuit.
- The 10-805-01 automatically tries to again switch
on the secundary circuit.
- If the problem is rectified, the 10-805-01 automa-
tically switches back on.
4. TECHNICAL DATA
Dimensions: .......................8U wide (H90 x W40 x D70mm)
Weight:...............................400g
Ambient temperature:..........0 to 40°C
Input: ................................230V±15%, 50Hz (terminals 1.5mm
2
)
Output: ..............................26V (Imax. 2,5A)
Note: connect the mass to terminal 9.
5. WARNINGS REGARDING INSTALLATION
• The installation should be carried out by a registered installer and in compliance with
the statutory regulations.
• This user manual should be presented to the user. It should be included in the electrical
installation file, and it should be passed on to any new owners. Additional copies are
available on the Niko website or via the Niko support service.
• During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
EN
