![background image](http://html1.mh-extra.com/html/niko/10-572/10-572_manual_1689552027.webp)
10-572 / 10-573
27
EN
6. PROGRAMMING AND CHANGING SETTINGS
6.1. Setting the ring tone and volume
You can set up a different ring tone for each type of call. The device offers a selection of 13 different ring tones.
1. Press the menu key in stand-by mode
.
The call settings menu will appear (fig. 5).
2. Press the menu key once again
to go through the settings.
3. Use the navigation keys to change the set value.
4. After 10 sec. the menu automatically switches off and the device returns to stand-by mode.
6.2. Adjusting the image settings
It is possible to change the contrast, brightness and colour intensity of the image.
Press the camera key or the
speech key
in stand-by mode to activate the camera image.
1. Press the menu key
.
The menu image settings will appear (fig. 6).
2. Press the menu key once again
to go through the settings or to confirm the new setting.
3. Use the navigation keys to change the set value.
4. After 10 sec. the menu automatically switches off and after 1 min. the device returns to stand-by mode.
6.3. Programming with the service set
To assign the internal video unit to a bell push button
as a first or second device
, check the manual of the power supply (10-80X) or the service unit (10-870).
To assign the internal video unit to a bell push button
as a third or fourth device
, connect the device in parallel (as a slave) with another internal unit.
Tip
: For easy programming, it is recommended that you attach the serial numbers of all internal and external units that are part of the installation onto the wiring
diagram. The serial numbers can be found on the packaging and on the device. The serial number of this internal unit can be found inside the upper frame.
1. Connect the service unit to the external unit using terminals a, b and P, or using the designated connector.
2. Enter the key combination onto the service unit depending on the type of action you wish to perform.
Attention
: Only one of the four functions (90, 91, 92 or 93) per internal video unit can be programmed.
Action
Key combination
Look up internal unit
* 52 #
Programming the call diversion
* 90 # serial number internal unit # serial number internal unit for diversion #
Use the free function key to activate this function (§ 4.1)
Programming the ring-and-come-in function
* 91 # serial number internal unit #
Use the free function key to activate this function (§ 4.1)
Programming internal call
* 92 # serial number internal unit # serial number internal unit to be called #
Use the free function key to activate this function (§ 4.1)
Activating control function 8 for the DIN rail relay
* 93 # serial number internal unit #
Use the free function key to activate this function (§ 4.1)
Connecting internal unit as slave to a master (parallel connection)
* 99 # serial number internal unit # serial number master #
Deactivate programming of master and slave
* 99 # serial number internal unit # 0 #
6.4. Assigning a ring tone to a specific bell push button
It is possible to set a different ring tone per internal unit for up to 5 bell push buttons. That is because the internal unit will also react to the four serial numbers
that follow its own serial number. When a call comes in, you can thus hear who it is for or where the call is being made from (e.g. practice-private, parents-
grandparents, etc.)
Program the installation with the service device (10-870) as follows:
Bell push button 1
Serial number
Ring tone
Bell push button 2
Serial 1
Ring tone
Bell push button 3
Serial 2
Ring tone
Bell push button 4
Serial 3
Ring tone
Bell push button 5
Serial 4
Ring tone