Niko 10-570, User Manual, Page: 20 / 32

20
EN
Operation and use
Function keys and LEDs
•
Open the door
and end the communication 4 seconds later.
• Switch the light relay before a call has been started (ask your installer).
Begin and end a
call
by pressing briefly.
Switch off the ring tone on this internal unit so you will not be disturbed. The red LED lights up
continuously if the function is active.
Call up the camera image and scroll through the available camera images.
Operate an
extra gate
or enclosure (ask your installer).
Call up the
menu
.
Via the menu, the following functions can be controlled:
• switching the
beep that accompanies contacting the keys on/off
• changing the
sound
and
image
settings
• making 10 different
internal calls
• operating a gate or an enclosure contact
• Switch on the light at the door
• Activate the “ ring-and-come-in ” function so that the door opens automatically when someone
rings at the external unit. The green LED lights up continuously if the function is active.
• Activate the
call diversion
so that another internal unit receives the call signal when someone rings.
The green LED lights up continuously if the function is active.
It is possible that the functions listed above are not provided in the installation. Check with your
installer.
• •
Red LED
• ring tone is switched off.
• flashing LED: The call has been answered by another device or the system is busy.
• •
Green LED
• call indication
• call diversion or ring-and-come-in function is active (ask your installer).
A separate ring tone has been provided for each type of call . The internal unit can distinguish between a call from
the main external unit, another external unit, an internal unit or the floor-bell push button (for example, at the apart -
ment door).
10-570 User manual internal video unit