Page: 20
p
81. Drill holes where you made your
marks.
p
82. Drill the 2.5° Thrust Wedges (available
at swanyshouse.com) for the motor bolt
pattern.
p
83. Install motor with thrust wedges. 4-40
stainless hardware recommended.
p
84. Throttle Linkage. Dubro 1/16” ball link
shown in this example.
p
85. Attach the ball link to the throttle arm.
p
86. Lay a piece of 1/16" music wire from
the throttle arm to the servo to get the
angle to drill a hole thru the leading edge.
