25
The Nike+ SportBand User’s Guide
About the Memory
The SportBand stores up to 30 hours of run info.
If your SportBand displays the message MEM LOW, you have about 1 hour
of recording time left. It will keep recording your run, but once the memory
is full, it will automatically stop.
If the memory reaches its full capacity while you’re recording a run, the
message MEM fULL will blink on the SportBand display twice, and it will
stop recording. The display will then exit to the current time of day.
If you press and hold the Record button (on top) to start a run, and the
memory has reached its full capacity, the MEM fULL message will blink
twice before exiting to the time of day. You cannot record a run when the
memory is full.
To free-up the memory, connect your SportBand Link to the USB port of a
computer installed with Nike+ Connect. All of your recorded runs will be
uploaded to nikeplus.com, and the memory will be freed to record more
runs.
Charging the Battery
It takes approximately 2 hours for the battery to fully charge. You can
charge the Link by connecting it to your computer’s USB port. The battery
will last for approximately 14 hours of run time before it needs to be
recharged.
While charging, the Link’s display will show the message CHRG. When the
battery is full, the message will change to “fULL BATT.” Check the battery
level any time using Nike+ Connect. Simply look at the icon in the lower-left
corner of the main window.
Another way to check the battery is to look at the icon on the SportBand
Link’s display. The battery icon will change from empty to full, to indicate
the amount of charge left on the battery.
