22
The Nike+ SportBand User’s Guide
Before using your heart rate transmitter for the first time, you’ll need to link it
to your Nike+ SportBand:
5 sec
3 sec
LINkING THE TRANSMITTER TO YOUR NIkE+ SPORTBAND
fig. 38.6
fig.38.7
Wear the Polar W Transmitter as instructed above. Make
1.
sure there aren’t any shoe sensors or other heart rate transmitters
nearby.
Press and hold the (side) Toggle button on the Nike+ SportBand for
2.
5 seconds. You’ll see a blinking “Link” message. When the heart
rate transmitter is linked, the display will read “Ok,” and the heart
icon will appear.
(fig. 38.6)
RUNNING WITH THE TRANSMITTER AND YOUR NIkE+ SPORTBAND
Use both your shoe sensor and heart rate
transmitter to get the most out of your run
(pace, distance, time, calories burned, and
beats per minute):
Wear the Polar W Transmitter as
1.
instructed above.
Press and hold the (top) Record button
2.
on your SportBand. Both the shoe and
heart icons will blink until they’re
connected with your shoe sensor and the heart rate transmitter. The device
will ask you to WALk in order to activate your shoe sensor and your heart
rate transmitter. When the shoe sensor is detected, the shoe icon will stop
blinking, and when the heart rate transmitter is detected, the heart icon
will stop blinking. You’ll then be ready to run. Press the Record button one
more time to start recording. While you’re running, toggle through your
