Nihon Bisoh Co.,Ltd. BISOMAC210 3Phase MM2014/11
KH-2014008 Rev.4
1
0. READ BEFORE USE
This Operator’s Manual is written for operators to use the equipment safely and properly. To
fully understand the usage of the equipment, please refer to the following instructions and system
compositions. (See picture-1) It is responsibility of the user of this equipment to determine
whether the equipment is safe according to this manual. Any operations in violation of the
instructions in this manual is operator’s own risk.
[System Components of the hoist and other applications]
[Picture-1]
1. POWER SUPLLY TO THE EQUIPMENT MUST BE FITTED WITH;
a) Main switch
NOTE: Main switch or Junction box shall have key-lock.
b) Residual current device (or Ground fault circuit interrupter) of 30 mA.
c) Over current protection device (Automatic circuit breaker type-C)
NOTE: To avoid voltage drop due to cable length, make sure that the specifications of
power cable matches the requirement of the equipment.
2. USAGE ENVIRONMENT
Temperature Range: between
14
ﾟ
F (-10
℃
) and 104
ﾟ
F (+40
℃
).
Humidity: Less than 100 % (without inundation, condensation and freezing)
Protection Grade: IP54
Maximum Wind Speed: In accordance with the specifications of platform.
Altitude: 3280ft (1,000m) or lower
Electric Traction Hoist
Suspension wire rope
Platform
Stirrup
Power Cable
