Nihon Bisoh Co.,Ltd. BISOMAC210 3Phase MM2014/11
KH-2014008 Rev.4
30
6. OPERATING THE HOIST
This section describes the followings to handle and operate the hoist safely.
1. Carrying and storing the hoist.
2. Operation methods of the hoist.
[CAUTION: Carrying]
[CAUTION: Storage]
CAUTION
When storing the hoist, remove Stirrup from BISOMAC.
*Refer to section 5 to remove Stirrup.
Storing with unstable state cause the hoist to fall down. It may cause injury or damage to
the hoist.
NOTE:
Do not stack BISOMAC more than 2 steps. Otherwise BISOMAC may fall down and
be damaged.
WARNING
1. Before operating the hoist each operator must understand and follow the
instructions in this manual and labels on the hoist.
Failure to comply with these instruction may cause the platform to fall or tilt and
consequently operators or objects might fall, resulting in serious injury or death to
operators or passers-by.
2. Do not overload on the platform.
Suspension rig may fall down, resulting in serious injury or death to operators or passers-
by.
CAUTION
Do not apply excessive load to shackle.
Applying load exceeding 165 lbs, shackle may be broken. It may cause the hoist to fall,
resulting in injury or damage to property.
CAUTION
1. When carrying the hoist by hands, hold handle to carry.
Unstable transporting may result in injury or damage to the hoist or property.
2. Do not use handle for any purpose other than carrying the hoist.
If excessive load is applied to handle, the hoist may be broken. It may cause injury or
damage to property.
